Lexmark X6100 User Manual
Page 78
74
If your All-In-One is attached to a computer, make sure:
•
Both your computer and your All-In-One are on.
•
The All-In-One is connected directly to your computer.
•
The USB cable is securely attached to your computer and to your
All-In-One. To purchase a USB cable, part number 12A2405, visit
the Lexmark Web site at www.lexmark.com.
Anytime your All-In-One has a problem, make sure:
•
You unlock the scanner:
1
Press Power to turn the All-In-One off.
2
Unlock the scanner.
3
Press Power to turn the All-In-One back on.
Note: If you have not unlocked the scanner, you will hear a
loud banging noise when you turn the All-In-One on.
•
You install both of the print cartridges. The Lexmark X6100 Series
only works if you have both cartridges installed. For help installing
the cartridges, see page 64.
•
You remove the stickers, transparent tape, and foam from the
bottom of the print cartridges. For an illustration, see page 65.
Problem:
Go to:
Document does not print
Document prints slowly
Document misfeeds or jams
Document prints poorly
Document is too light or too dark
Display language is not preferable
Date and time on the display is incorrect
All-In-One is not communicating with the computer
Black and white copy quality is unsatisfactory
Document has a checkerboard pattern