Kenwood TK-7150 - Manual (Page 43)

TK-7150
43
Item Condition
Measurement Adjustment
Specifications/Remarks Test-
equipment
Unit Terminal Parts Unit Method
ADJUSTMENT
18. Single tone 1) CH-SIG : 1-11 Power meter Rear ANT Front Selector ± 3.0kHz ± 0.1kHz
deviation Select Tone_Dev_ ✽✽✽ Deviation panel panel knob
• Wide in tuning mode meter
PTT : ON
Deviation meter filter
AF VTVM Front MIC
HPF : OFF AG panel
LPF : 15kHz Oscilloscope
De-emphasis : OFF
• Narrow 2) [PF5] key : Set the narrow ± 1.5kHz ± 0.05kHz
n_ _
Tone_Dev_
✽✽✽
in tuning mode
PTT : ON
19. Sensitivity 1) CH-SIG : 2-1 SSG Rear ANT Front Selector Adjust for maximum SINAD 12dB or more
Select _ _L panel panel knob SINAD.
Sens_ _ _ _ _ ✽✽✽
in tuning mode AF VTVM EXT.SP
SSG output : –117dBm/0.32µV Distortion
AF output : 2V/4Ω
meter
Oscilloscope
2) CH-SIG : 4-1 4Ω dummy
Select _CL load
Sens_ _ _ _ _ ✽✽✽
in tuning mode
3) CH-SIG : 1-1
Select _ _C
Sens_ _ _ _ _ ✽✽✽
in tuning mode
4) CH-SIG : 5-1
Select _HC
Sens_ _ _ _ _ ✽✽✽
in tuning mode
5) CH-SIG : 3-1
Select _ _H
Sens_ _ _ _ _ ✽✽✽
in tuning mode
20. Squelch 1) CH-SIG : 1-1 Adjust to point of Set the value to 255.
tight Select Sql_T_ _ _ _ ✽✽✽ opening squelch Adjust the SSG output to
• Wide in tuning mode “Condition”.
SSG output : Value when 6dB Then, decrease the value to
is added from the sensitivity the point of opening the
value of 12dB SINAD. squelch.
• Narrow 2) [PF5] key : Set the narrow
n_ _
Sql_T_ _ _ _
✽✽✽
in tuning mode