Kyocera FS-1200 - Manual (Page 69)

2.12. Ecoprint Mode
2-25
Optimized stripes
The current KIR setting is optimal.
Dark vertical stripes
Set the KIR mode to
ý2II. Try printing the status page again. If you still get
dark vertical stripes, adjust the print density control to a lighter setting.
(See the last page in this manual.)
White vertical stripes
Set the KIR mode to ý2Q. Try printing the status page again. If you still get
white vertical stripes, adjust the print density control to a darker setting.
(See the last page in this manual.)
2.12. Ecoprint Mode
The Ecoprint enables you to reduce the amount of toner
consumed on the page so as to save your printing costs.
You can set to Ecoprint mode on, as follows. (The factory-
setting is
ý2II. )
The Ecoprint mode setting is
ý2Q when the printing
image becomes lighter, yet very readable.
☛ The Ecoprint setting has no effect on the print
speed.
Ecoprint setting is
2II (default).
Ecoprint setting is ý
2Q.