beautypg.com

Configuring interfaces, Parallel interface, Parallel interface -13 – Kyocera FS-1200 User Manual

Page 57: 13 2.4. configuring interfaces

background image

2.4. Configuring Interfaces

2-13

2.4.

Configuring Interfaces

The printer is equipped with a parallel interface. An optional serial interface is also available.

To configure each interface, press the

MODE key and use the + or – key to select the interface you wish to make

settings for.

☛

This interface selection does not select which interface data will be received from. The printer auto-
matically selects that interface.

Parallel Interface

The parallel interface mode of this printer supports a bi-directional/high-speed mode. Normally, this inter-
face is used under the default setting

ý$XWR, see Appendix C. After setting the interface, be sure to reset the

printer or turn the power off at least once. The new setting will be enabled thereafter.

See also other documents in the category Kyocera Printers: