Changing the low beam bulb, Maintenance work on chassis and engine – KTM 1190 RC8 FR User Manual
Page 159

MAINTENANCE WORK ON CHASSIS AND ENGINE
157
Warning
Fire hazard The electrical system can be overloaded by the use of incorrect
fuses.
– Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
– Use spare fuses with the correct rating only.
Fuse (75011088010) (
Fuse (75011088015) (
Info
If the new fuse burns out, contact an authorized KTM-RC8 workshop.
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
– Close the fuse box cover.
– Fit the seat. (
9.60
Changing the low beam bulb
Note
Damage to reflector Keep the glass of the bulb free of grease.
– Clean the glass bulb with a clean cloth before mounting. Any grease on the glass will evaporate by the heat and be deposited on the
reflector.
– Switch off all power-consuming components and switch off the engine.