Vehicle level, Maintenance work on chassis and engine – KTM 1190 RC8 FR User Manual
Page 111
MAINTENANCE WORK ON CHASSIS AND ENGINE
109
9.17
Vehicle level
700333-01
Warning
Danger of accidents Modifications to the chassis can seriously alter the vehicle's
handling characteristics.
– Following modifications, ride slowly at first to get the feel of the new handling
characteristics.
The vehicle level can be adjusted at the front by means of the fork leg clamp and at the
rear by the eccentric shaft.
The fork legs can be clamped at three positions in the triple clamps.
Upper triple clamp flush with
upper edge of fork legs
0 mm (0 in)
Upper triple clamp flush with
1st ring of fork legs
2.5 mm (0.098 in)
Upper triple clamp flush with
2nd ring of fork legs (stan-
dard)
5 mm (0.2 in)
The chassis height can be adjusted steplessly by turning the eccentric shaft.
Chassis height difference
HIGH - LOW
7 mm (0.28 in)
Maximum adjustment range
between
HIGH - LOW
180°