KTM 1190 RC8 FR - Manual (Page 107)

MAINTENANCE WORK ON CHASSIS AND ENGINE
105
Info
The spring preload defines the initial situation of the spring process on the shock absorber.
An optimally adjusted spring preload is adapted to the rider's weight and ensures a compromise between easy handling and stabil-
ity.
700341-10
– Take the weight off the rear wheel and swingarm.
Info
The spring preload can be adjusted correctly only if the rear wheel and the
swingarm are fully relieved of weight.
– Loosen screw  two turns, but do not remove.
700342-01
– Turn the adjusting ring anticlockwise with the toolset wrench until the spring is com-
pletely relaxed.
Hook wrench (69012022000)
Extension (60012060000)