KTM 1190 RC8 FR - Manual (Page 135)

MAINTENANCE WORK ON CHASSIS AND ENGINE
133
700263-01
– Check the brake linings for minimum thickness  .
Minimum thickness  ≥ 1 mm (≥ 0.04 in)
» If the minimum thickness is less than specified:
– Change the front brake linings. x
9.40
Checking rear brake fluid level
Warning
Danger of accidents Failure of brake system.
– If the brake fluid level falls below the MIN mark, there may be a leak in the brake system or the brake linings are completely
worn out. Have the brake system checked in an authorized KTM-RC8 workshop before continuing your journey.
Warning
Danger of accidents Reduced braking effect caused by old brake fluid.
– Have the brake fluid of the front and rear brakes changed according to the service plan in an authorized KTM-RC8 workshop.