Maintenance work on chassis and engine – KTM 1190 RC8 FR User Manual
Page 114
MAINTENANCE WORK ON CHASSIS AND ENGINE
112
700331-01
– Loosen screw
but do not remove it.
700332-01
– Turn the eccentric shaft
to the desired position using the tool from the tool set.
Guideline
Standard
LOW
Maximum adjustment range between
HIGH - LOW
180°
Open end wrench SW 38 (69012021000)
Info
You can adjust the chassis height in both directions.
This manual is related to the following products:
See also other documents in the category KTM Motorcycles:
- 125 SX (48 pages)
- EXC-F 400 XC-W (68 pages)
- 400 EXC RACING (66 pages)
- 530 XCR-W USA (125 pages)
- Supermoto 40LC4-E (46 pages)
- 380SX (153 pages)
- 640 LC4 (50 pages)
- 990 SUPER DUKE R (92 pages)
- 990 SUPER DUKE (90 pages)
- 50 SX PRO JUNIOR LC (35 pages)
- 125 SX (46 pages)
- EXC 200 EXC (70 pages)
- 690 ENDURO AUS/UK (179 pages)
- 400 (46 pages)
- XC 105 SX (42 pages)
- SUPERENDURO R 950 (40 pages)
- 990 ADVENTURE (102 pages)
- 200 (67 pages)
- 560 SMR 2006 (28 pages)
- 50 SX (42 pages)
- 85 SX (40 pages)
- 250 SX-F (70 pages)
- Super Duke 990s (52 pages)
- 525 SX (62 pages)
- 950 SUPERMOTO R (86 pages)
- 3CF6001G6EN (24 pages)
- 950 R (86 pages)
- Supermoto 640LC4 (46 pages)
- ENDURO 640 LC4 (60 pages)
- 85SX (42 pages)
- ENDURO SUPERMOTO 640 LC4 (60 pages)
- Supermoto 690 (165 pages)
- 950 SUPERMOTO (90 pages)
- 950 (86 pages)
- 300SX (56 pages)
- Supermoto 640 LC4 (40 pages)
- 3CF8403H0EN (28 pages)
- 50 SX JUNIOR (42 pages)
- 450 SMR (91 pages)
- 85/105 SX (42 pages)
- 3CF6001F5EN (20 pages)
- 300 XC 2008 (74 pages)
- XCF-W 250 EXC-F EN (63 pages)
- EXC 250 XC DE (69 pages)