KTM 1190 RC8 FR - Manual (Page 182)

MAINTENANCE WORK ON CHASSIS AND ENGINE
180
9.76
Adjusting rear frame position
Warning
Danger of accidents Modifications to the chassis can seriously alter the vehicle's handling characteristics.
– Following modifications, ride slowly at first to get the feel of the new handling characteristics.
700327-10
Setting a higher seat position:
– Remove screw  with washer on the left and right side of the vehicle.
– Press the rear end down until the drill holes of the frame are level with the lower
front drill holes of the frame rear.
700329-01
– Fit the screw and washer on the left and right sides of the vehicle, but do not
tighten.