Kathrein Twin-PVR Satellite UFS 821si - Manual (Page 97)

97
Installation Menu
Edit Transponders
Satellite Name:
Press

to access a list of all stored satellite. Use the

buttons to select the satellite you want.
Transponder Frequency:
Use the
 buttons to select the transponder frequency.
New Transponder:
Press
 to access the input form to enter the data of a new transponder
on the satellite you previously selected.
Enter the data (frequency, polarisation, symbol rate) using the number
pad and the
 buttons. When you have entered all the data
and settings, use the

buttons to select “OK” and press

to add
the new transponder. The new transponder is inserted into the list of
available transponders on the satellite.
Delete Transponder:
Press
 to delete the current selected transponder. Use the 
buttons to select “OK” on the on-screen prompt and press  to confirm
deletion of the transponder and its channels.
Only make changes to this menu when settings or circumstances
relating to the transponders have changed. The settings should be
made by a specialist engineer.
Deleted transponders can be
re-located by way of an automatic
search with active network
search on the transmitting
satellite.
On Air Download
See “Software and Programme List Update” section