Kathrein Twin-PVR Satellite UFS 821si - Manual (Page 103)

103
PVR Manager (USB Tool)
Safety Instructions
Before installing the USB tool for KATHREIN receivers, refer to the
safety instructions for your KATHREIN receiver.
General Notice
KATHREIN cannot be held liable for damage, loss of data or consequential
loss of any kind (e.g. loss of profit, interruption of production, loss of
data and information, or other detriment to assets) resulting from the
use or non-usability of this KATHREIN product, even where KATHREIN
has advised of the possibility of such loss occurring.
System Requirements/USB Port/Receiver Requirements
Your PC must be running Windows 2000 or Windows XP as its operating
system. The USB port must be USB 2.0-compatible. Your receiver must
be a UFS 821sw or UFS 821si.
Required Software
“PVR Manager” (USB application and USB driver) can be downloaded
from http://www.kathrein.de/esc-kathrein/download/receiv_soft.htm.
USB Cable
To connect your PC to the receiver you will need a USB cable with type
A and B connectors. Do not connect the receiver to your PC‘s USB port
until you have installed the software!
Standard Installation
Note: The software must be installed before the receiver is first connected to
the USB port!
1. Double-click on the “Setup.exe” file to start the installation routine.
2. Click “Next” to confirm the prompt which appears.