Kathrein Twin-PVR Satellite UFS 821si - Manual (Page 96)

96
Installation Menu
Edit Satellite Data
Satellite Name:
Press
 to access a list of all stored satellite. Use the 
buttons to select the satellite you want.
Transponder Frequency:
Use the
 buttons to select the transponder frequency.
Edit Satellite Longitude:
Use the number pad to key in the new longitude. Use the

buttons
to choose between E (East) and W (West).
New Satellite:
Press
 to enter the name of a new satellite using the alphanumeric
keypad (see “Alphanumeric Inputs”).
You can now edit the “Satellite Longitude” setting for this satellite.
Delete Satellite:
Press
 to delete the current selected satellite. Use the  buttons
to select “OK” on the on-screen prompt and press  to confirm deletion
of the satellite with all its transponders and channels.
Only make changes to this menu when settings or circumstances
relating to the satellites have changed. The settings should be
made by a specialist engineer.
Deleted satellites must be re-
entered manually. If the satellite
was factory pre-programmed, it
can also be restored by a factory
reset. All your personalised
settings (such as Favourite
lists) will be lost in the process
however.