Kathrein Twin-PVR Satellite UFS 821si - Manual (Page 91)

91
- Automatic Search: Unrestricted search across all transponders on
all satellites (network search possible, selection of FTA and encoded
channels possible)
- Manual Search (transponder selection possible, FTA and encoded
channels possible, network search possible)
- Advanced Search: Search for a specific channel possible, based on
transponder data and PIDs
Installation Menu
Network Search:
Use the
 buttons to select the setting for the network search.
If you set the network search to “On”, the transponder network enables
additional transponders that have not yet been stored to be located.
They are then stored and scanned for new channels in the same way
as the existing transponders.
If you set the network search to “Off”, only the current stored transponders
of the satellites you previously selected will be scanned for new as yet
unlisted channels.
FTA CA Select:
Use the
 buttons to select whether you want to search through all
channels or only FTA (Free to Air) or CA (Conditional Access) channels
(Common Interface “required”).
Start Search:
When you have made your selection, use the
 buttons to select
“Start Search” and press  to start searching.
Automatic Search