Kathrein Twin-PVR Satellite UFS 821si - Manual (Page 75)

75
You can use this function, for example, to remove ad breaks from your
recorded programmes.
Make sure you have also selected “Cut” with the
 button.
Use the

buttons to select the recording you want to cut and
press  . The following display appears (example):
Cut
Also pay attention to the bars
at the bottom of the on-screen
display! They provide hints on
what to do next.
The removed portion of
a recording cannot be
recovered! Make a backup
copy of the recording before
cutting it for the first time (see
“Copy”).
Copy the range marked “Middle” as follows:
- Move to the start of the range you want to copy and press
 . Then
press  to set the start point marker of the range to be copied. Then
move on to the end of the copy range. Press  again and  to set
the end marker.
Copy the range marked “End” as follows:
- Move to the start of the range you want to copy and press
 . Then
press  to set the start point marker of the range to be copied.
Then press  to automatically mark the full range to the end of the
recording.
Copy the complete recording as follows:
- Press
 twice to select the complete recording.
Press  to copy the selected range (the selection will be darkened
on-screen) or press  to reset the markers.
The UFS 821 then internally duplicates the selected recording range as
a new recording. When the copy operation is complete the recording list
appears. The copy is indicated by a “C:” in front of the name.
Recording List