Kathrein Twin-PVR Satellite UFS 821si - Manual (Page 61)

61
TVTV EPG and Timer
You now have a number of options to programme your recording.
The settings are made using the arrow buttons (

) and the
number pad:
• Recording status (once, daily, weekly, user-defined, series) - selected
using the  buttons
• Date (advanced day-by-day) - selected using the  buttons
• Start time (advanced minute-by-minute) - selected using the

buttons or entered directly using the number pad
• End time (advanced minute-by-minute) - selected using the

buttons or entered directly using the number pad
• Recording on (hard disk or external recorder, e.g. video recorder)
- selected using the  buttons.
In user-defined recording you can use the

buttons to move to
the various days of the week and press  to activate and deactivate
them.
You can also change the data and settings of timer recordings you have
programmed from the timer list by pressing the
 button. Edit data by
the same method used to input them.
Press
 to save the selected recording data.
If the timer recording you are programming overlaps with one or more
recordings already programmed, you will see the following message
(example):
Note:
When recording to the hard disk
the signal is not forwarded to the
VCR Scart socket!
Also, when recording to a VCR
or PVR, note that most digital
TV signals do not contain a VPS
signal.
You must therefore always
programme your external video
or PVR to match the timer
settings.
Press  to return to the listing and edit your input accordingly. The
recordings in black are the ones already stored. The one in white is the
one you are currently programming which cannot be entered because
of other existing recordings.