Kathrein Twin-PVR Satellite UFS 821si - Manual (Page 71)

71
Recording List
- Date of recording (ascending)
- Recording duration (descending)
- Recording duration (ascending)
- Recorded channel (descending)
- Recorded channel (ascending)
- Title of recording (descending)
- Title of recording (ascending)
- Date recording (descending)
The next time you call up the recording list the last mode (TV/Radio)
and sort order you selected are displayed.
During playback you can keep the channel notification info-box
permanently on-screen by pressing the
 button, and press it again
to view the accompanying EPG data (see example below). Press  to
cancel the on-screen displays.
Recorded programme
Channel name
Playback time so far/Total
recording duration
Accompanying EPG data. Use
the

buttons to scroll
through the EPG data.
Decoding a Recording
You can record encoded programmes even when the CA module with
the Smartcard is not inserted. However, to view what you have recorded
the CA module with Smartcard must be inserted in the Common Inter-
face on the receiver.
You can also decode a recording after having recorded it, so as to be
able to view it in future without the CA module/Smartcard combination.
For this the CA module with Smartcard must be inserted in the Common
Interface on the receiver.
Encoded recordings are indicated by a $ sign at the end of the line (after
the recording duration).
Use the

buttons to select the encoded recording and
press  . On the screen which the receiver then displays use the 
buttons to select “OK” and press  to prepare decoding. The receiver
then displays the following message:
“Decoding will be started in standby”.
Press
 to confirm this message. As soon as you next switch the
receive to standby the recording will be decoded. The progress of
decoding is indicated on the display. Wait for the decoding to complete
before switching on the receiver.