Kathrein Twin-PVR Satellite UFS 821si - Manual (Page 74)

74
With this function you can copy a recording, or parts of it, to the hard
disk.
Make sure you have also selected “Copy” with the
 button.
Use the  buttons to select the recording you want to copy
and press  . The following display appears (example):
Copy
The receiver automatically starts playing back the recording.
You now have several options for specifying the range to be copied
(see example bar):
Recording List
Also pay attention to the bars
at the bottom of the on-screen
display! They provide hints on
what to do next.
Start Middle End
To set the exact times for the start and end markers of the copy range
as quickly as possible you can use various buttons as aids:
- Press
 to stop playback and freeze the frame
- Use the  buttons to rewind or fast forward at up to 24 times
playback speed (you can only fast forward recordings which have not
yet decoded at 4 times playback speed and rewind them at 2 times
playback speed)
- Use the  buttons to jump forward or back in 30-second blocks
Copy the range marked “Start” as follows:
- Move to the end of the range you want to copy and press
 . Then
press  to set the start point marker of the range to be copied.
The receiver automatically marks the full range back to the start
of recording. Then press
 to set the end marker at the end of the
recording range you want to copy.