Kathrein Twin-PVR Satellite UFS 821si - Manual (Page 69)

69
Recording Direct to Hard Disk Immediately/Later
- You can start recording the programme immediately. Use the 
buttons to move to the “Start Record” field and use the

buttons
to select “Immediate”.
- You can also start recording at a later time. Move the  buttons
to the “Start Record” field and use the  buttons to select the
time after which you want recording to start. You can choose between
1 minute and 119 minutes, in 1 minute increments.
Duration/End
You can specify the duration of a recording regardless of when it starts.
The receiver automatically retrieves the end time of the programme you
are currently viewing from the EPG data (where available) and inserts
it in the “Duration” field. Otherwise the end time is based on the default
duration you set on the “User Preference” menu under “PVR Setup”.
If your programmed recording overlaps with another scheduled
recording, the end time of the current recording is matched to the start
time of the one already scheduled. To change the recording duration,
use the

buttons to move to the “Duration” field and use the
 buttons to select the time after which you want recording to stop
automatically. Press  to shorten the recording by 10 minutes and  to
extend it by 10 minutes.
When you have finished making your settings, use the
 buttons to
select “OK” and press  to start recording. If the end time still overlaps
with the start time of a scheduled recording, the receiver automatically
switches to the tvtv-EPG's timer list, where you can delete, cancel or
edit one of the two programmed recordings listed.
Start
Press the red
 button. The following display appears:
Recording
If there is an overlap with
another scheduled or
ongoing recording, the fact
is indicated. The receiver
then presets the end time for
your new recording as the
start time of the overlapping
programme (see “Duration/
End” at the right).