Kyocera KM-C2030 - Manual (Page 98)

5.3 Specifying a Zoom Setting 5
5-11
Sp
ec
ify
ing Co
py
Se
tti
ngs
Ch
apte
r 5
To recall a stored custom zoom ratio
1 Touch [Zoom].
A screen appears, showing the available Zoom settings.
2 Touch [CustomZoom].
3 Touch [Set].
4 Touch [1], [2] or [Minimal].
5 Touch [Enter]. The entered zoom ratio is recalled.
To specify different vertical and horizontal scaling proportions (“X/Y Zoom”
setting)
1 Touch [Zoom]. A screen appears, showing the available Zoom settings.
2 Touch [CustomZoom].
3 Touch [X/Y Zoom]. The X/Y Zoom
screen appears.
4 Make sure that [X] is selected.
5 Using the keypad, type in the de-
sired length of side X (between
×0.250 and ×4.000). The entered
zoom ratio is displayed.
6 Touch [Y].
7 Using the keypad, type in the desired length of side Y (between ×0.250 and
×4.000).
The entered zoom ratio is displayed.
8 Touch [Enter].
The entered zoom ratio is displayed.