Kyocera KM-C2030 - Manual (Page 93)

5 5.2 Selecting a Finishing Setting
5-6
Sp
ec
ify
ing Co
py
Se
tti
ngs
Ch
apte
r 5
● If nonstandard-size paper is used, the paper length must be between 7-1/4 in.
and 17 in.
● The copier must not enter Interrupt mode.
To specify Finishing settings
1 Touch [Finishing].
A screen appears, showing the available Finishing settings.
2 Select the desired Finishing settings.
3 When “2-Hole Punch”
or “3-Hole Punch” is
selected, the [Change
Position] key appears.
4 Touch [Change Position]. The
Change Position screen appears.
5 Select the desired position for the punched holes, and then touch [Enter].