To recall a job from the memory -22 – Kyocera KM-C2030 User Manual
Page 147
6
6.3 Job Control Screens
6-22
Co
ntr
o
lli
ng J
o
b
s
Cha
p
ter 6
Touch [Basic] to display the Basic screen again.
The following details of the jobs are displayed.
To recall a job from the memory
1
Select the job that you wish to print from the memory.
❍
To recall more than two jobs, repeat the above step until all jobs that you
wish to recall are selected.
2
Touch [OK]. The jobs are deleted from the list on the Memory Recall screen.
❍
The job changes from one stored in the memory to one waiting to be printed.
3
Touch [Job Log], and check the status of the jobs.
No.
Item Name
Description
1
Job number
Job identification number assigned when the job is programmed
2
Up/down arrows
When there are more than five jobs, press these arrows to
display jobs higher or lower in the list (higher or lower in the
printing order).
3
Job name
Displays the type (source) of the job
“COPIER” is displayed for copy jobs.
4
Output location
Indicates the tray where the printed page will be fed out
5
File name
Displays the name of the file for print jobs sent from the
computer
6
Original
Displays the number of pages in the original document
7
Copy
Displays the number of pages in the copy
While the job is being printed, the number of pages remaining
to be printed is counted down.
8
Beginning time
Displays the time that the job was programmed
9
Completion time
Displays the time when printing of the job is expected to be
finished
3
4
5
6
7
8
1
2
2
9