Kyocera KM-C2030 - Manual (Page 43)

2 2.3 Stopping Printing
2-12
B
a
s
ic
Co
py
O
per
ati
o
n
s
Chap
ter
2
2.3 Stopping Printing
A job can be canceled while it is being printed.
To stop/restart/delete a print job
1 Press the [Stop] key while the job is being printed. The printing
stops.
The message “Job has
been stopped.” ap-
pears.
2 To continue printing the job, press the [Start] key.
Printing continues.
3 To delete a stopped print job, select the job that you wish to cancel, and then
touch [Delete].
4 After touching [Delete], the message “Job has been done improperly. Check the
record.” appears. The job being printed is deleted.
5 Touch [Enter].