Kyocera KM-C2030 - Manual (Page 64)

3.5 Loading Paper 3
3-15
Lo
adi
ng P
a
p
e
r
Ch
apte
r 3
6 Touch .
7 Touch and to select the length of side Y for the paper that is loaded.
❍ Touch until the cursor moves below the fraction that you wish to
change.
The entered length of side Y appears.
8 Touch [Enter], and then touch [Enter] in the Input screen.
9 The paper size for the 1st drawer is set.
To store a non-standard (custom) paper size
✔ Two non-standard paper sizes can be stored. Storing paper sizes that are used
often enables the paper size to be quickly selected, without having to re-enter
the setting.
1 Touch [Paper].
A screen that shows the specified paper size settings appears.
2 Select the 1st drawer, and then touch [Size Change].
3 Touch [Custom Size].
The Custom Size screen appears.
4 Make sure that
is selected.
5 Touch and to select the length of side X for the paper that is loaded.
❍ Touch until the cursor moves below the fraction that you wish to
change.
The entered length of side X appears.
6 Touch .