Kyocera KM-C2030 User Manual

Page 96

5.3 Specifying a Zoom Setting

5-9

ify

ing Co

tti

ngs

apte

r 5

Minimizing (“Minimal” Setting)

The copy is slightly reduced (

×0.930).

●

Selecting the “Minimal” setting ensures that any part of the original positioned
at the edge of the page will not be cut off in the copy.

●

The zoom ratio of the “Minimal” setting can be changed to any ratio between
×0.900 and ×0.999.

❍

For details on changing the zoom ratio, refer to “Specifying a Custom Zoom
Ratio (“CustomZoom” Setting)”.

Zooming

Any zoom ratio (between

×0.250 and ×4.000) can be specified.

●

Touch

and

to specify the desired zoom ratio. Each

time

is touched, the zoom ratio is increased or

decreased by an increment of

×0.001.

Custom Sizing (“CustomZoom” Setting)

Any zoom ratio (between

×0.250 and ×4.000) can be specified.

●

Use the keypad to enter the desired zoom ratio.

●

Up to two zoom ratios entered using the keypad can be stored.

Vertical and Horizontal Scaling (“X/Y Zoom” Setting)

The copy size can be changed by specifying different scaling proportions (between
×0.250 and ×4.000) for the vertical and the horizontal dimention.

To specify a Zoom setting

Touch [Zoom].

A screen appears, showing the available Zoom settings.

Select the desired Zoom setting.