Setting the printer time and date, Setting the current time, Select “setup” from the main menu on the ocp – Kodak RP 50 2J0686 User Manual
Page 49: Select “time, Select “current time, Use the up and down arrows to select a new time, Press select to save the new value, Setting the current date, Select “current date, Use the up and down arrows to select a new date
System Operating Procedures
October 2002
3-17
Setting the Printer Time and Date
Setting the Current Time
1.
Select “Setup” from the main menu on the OCP.
2. Select
“Time”.
3. Select “Current Time”.
4. Use
the
Up and Down Arrows to select a new time.
5. Press
Select to save the new value.
6. Select “Exit” to return to the previous menu on the OCP.
Setting the Current Date
1.
Select “Setup” from the main menu on the OCP.
2. Select
“Time”.
3. Select “Current Date”.
4. Use
the
Up and Down Arrows to select a new date.
5. Press
Select to save the new value.
6. Select “Exit” to return to the previous menu on the OCP.
Setting the Current Day
1.
Select “Setup” from the main menu on the OCP.
2. Select
“Time”.
3. Select
“Day”.
4. Use
the
Up and Down Arrows to select a new day.
5. Press
Select to save the new value.
6. Select “Exit” to return to the previous menu on the OCP.
Setting the Paper Length
The value displayed is the length of paper (in feet) that remains on the supply roll.
This number should be edited when a new or partially used paper roll is installed
in the printer. You receive a prompt to enter this number when a new roll is being
loaded into the printer. The range for paper is 0 to 999.
1.
Select “Setup” from the main menu on the OCP.
2. Select
“Paper”.
3. Select “Current Length”.
4. Use
the
Up and Down Arrows to select a new length for the paper.
5. Press
Select to select/set the new value.
6. Select “Exit” to return to the previous menu on the OCP.