Kodak RP 50 2J0686 - Manual (Page 24)

Using the System
2-4 October 2002
The LED Calibration screen appears.
3. Click the Go icon to start the calibration cycle.
Downloading LUTs and Sending Test Print highlights.
If the configuration file specifies to Ask if processor is in control, the
Process In Control dialog box appears.
The processor is critical to printer calibration. You can calibrate the printer
only if the processor is in control. Densitometers require calibration at regular
intervals. Refer to your densitometer’s manual for instructions on how to
calibrate your densitometer.
4. Click Yes.
Go icon
This icon highlights after
you select Go