Shutting down the processor – Kodak RP 50 2J0686 User Manual
Page 30
Using the System
2-10
October 2002
Shutting Down the Processor
To shut down the processor, press the On/Off key on the processor OCP.
Shutting down the processor for service
If you are shutting the processor down for service, turn off the processor circuit
breaker after the green light on the OCP is no longer illuminated. The exhaust fan
in the processor will continue to operate.
IMPORTANT: If the processor will not be used for longer than four days, drain,
flush, and clean the processor tanks.
1.
Remove the top cover and the light tight cover from the processor.
top cover
light tight cover