Kodak RP 50 2J0686 - Manual (Page 45)

System Operating Procedures
October 2002 3-13
Reaching the End of the Roll of Paper
When the end of the roll of paper is reached, the OCP displays one of two
messages:
• “Out of paper, open supply door to load...” — indicates that the supply
cassette is empty. To remove the paper, open the supply door and pull the
paper out of the shoe.
• “End of roll, remove sheet from sheet transport” — indicates that the
supply cassette is empty. In this situation, the paper cannot be reversed into
the roll supply area since the trail edge of the paper has moved into the shoe.
The remaining paper is then moved forward into the sheet transport area with
the lead edge of the paper just beyond the knife. To remove the paper, grasp
its lead edge and pull it out of the shoe.
NOTE: If necessary, gently push the deflector down and use the shoe exit roller
knob to advance the paper into the chad area.
shoe exit roller knob
deflector
paper