Kodak RP 50 2J0686 - Manual (Page 177)

Using the Image Print Server Software
October 2002 D-9
Source Directory Preferences Dialog Box
Option Descriptions
The selections/options that you can make from the Server Default dialog box are:
OK—closes the dialog box and saves the specified values.
Cancel—closes the dialog box without saving any changes.
Source Directory—the directory/folder where the TIFF application will look for
the TIFF images to arrive. Type a directory name or click the browse button.
Log File—the file name where the IPS application will store the printer error
information. Type a file name or click the Browse button.
Copies—the number of copies to print. The valid number of copies is 1–9999
Center Image—centers the image on the paper.
Printer Resolution—“125 ppi” enables the hardware pixel replication capability
on the printer, “250 ppi” prints the image pixel for pixel.
Print Production—“Immediate” instructs the printer to print the image
immediately, “Deferred” allows the printer to buffer the image until an entire sheet
of images can be printed.
Punches—”Order Punch” places a punch between each order. “ID Punch” places
a punch .25 in. inside each area to mark a gutter for the host image information.
Tone Scale Correction—”Correction File” is the name of the file to use for the
tone scale correction. A 2.2 gamma correction LUT is installed with the
application. See “Installing the Software” on page D-2 for the default installation
location. Select “Apply” to instruct the application to apply the LUT to the image.