Siemens 300 - Manual (Page 50)

50
Appendix
Gigaset USB Adapter 300 / multilanguage / A31008-M1066-R101-2x-7619 / appendix.fm / 14.11.2008
Sc
hablone 200
4_12
_27
Specifications
The specifications are subject to change.
Software
The transmission
rate is too low. For
example, there are
pixel errors with
video streaming. Radio data transmission depends on the operating environ-
ment, for example the building stock or the influence of other
devices in the vicinity that also transmit in the 2.4-GHz fre-
quency range.
ì
Arrange your WLAN devices closer together.
ì
Change the orientation of your Gigaset USB Adapter 300,
for example by using the delivered stand.
ì
Change the orientation of the access point.
ì
Position the device elsewhere.
ì
Switch off other radio sources in the vicinity. They may
interfere with data transmission.
ì
Choose a different channel. You will find further informa-
tion in the user guide for your access point.
ì
Check to see if the problem also arises with a different type
of encryption.
Compliance with
standards IEEE 802.11b/802.11g/802.11n (draft, see page 7)
Network modes Ad-hoc mode
Infrastructure mode
Security properties Support of SSID network identification for security
Support of data encryption using the
WEP algorithm (64-bit/128-bit)
WPA-PSK and WPA2-PSK encryption
Authentication with WPA
Wi-Fi Protected Setup (WPS)
Adjustment of transmission power
Further security settings in conjunction with routers (filter for
MAC addresses, firewall, etc.)
Configuration and
monitoring Monitor for configuration and monitoring
Dynamic configuration
2 LED displays for operation and transmission states
Supported operating
systems Windows Vista, Windows XP or Windows 2000
Problem Causes and remedies