beautypg.com

Siemens 300 User Manual

Page 26

background image

26

Configuring the Gigaset USB Adapter 300

Gigaset USB Adapter 300 / multilanguage / A31008-M1066-R101-2x-7619 / configuration.fm / 14.11.2008

Sc

hablone 200

4_12

_27

The Status tab displays the configured data if the connection was successfully estab-
lished within two minutes.

There is no need for further settings. However, you may adapt the values for Sending
Power
and Power Saving on the ConfigurationCommon tab to your situation (see
page 30). The
fields in the Status window are described on page 37.
The security settings are saved in the client after successful connection to the access
point. The security settings and the settings for data traffic are available in the default
profile the next time the Gigaset WLAN Adapter Monitor is started.
If the connection to the access point could not be established within two minutes, all
fields in the Status window remain empty. Check whether the Registration Mode you
have chosen corresponds with the setting on the access point and restart the registra-
tion on the access point (see page 21).