Siemens 300 - Manual (Page 11)

11
Installing the Gigaset USB Adapter 300
Gigaset USB Adapter 300 / multilanguage / A31008-M1066-R101-2x-7619 / installation.fm / 14.11.2008
Sc
hablone 200
4_12
_27
Installing the Gigaset USB Adapter 300
System requirements
To operate the adapter, you need:
u A PC running at a minimum of 466 MHz and one of the following operating systems:
Windows Vista, Windows XP or Windows 2000
u 64 MB RAM, more memory is recommended
u Minimum free hard drive capacity of 30 MB
u A free USB slot
u A CD-ROM drive or a DVD drive
Contents
The package contains the following components:
u One Gigaset USB Adapter 300
u One USB cable and a stand for the adapter
u One CD-ROM with installation and configuration software, the detailed user guide
and Adobe Reader, which you will need to read the user guide
u One Quick Start Guide
Installation process
First, the software included in delivery must be installed. This software contains both
the driver software for the device and the tool for configuring and monitoring the
Gigaset WLAN Adapter Monitor.
Only this software has been tailored precisely to the Gigaset USB Adapter 300. Similar
drivers are included with the Windows driver databases. However, such drivers do not
usually offer the full range of features or function in a completely different way.
Do not connect the Gigaset USB Adapter 300 to your PC until you are prompted to do so.
If you insert the Gigaset USB Adapter 300 on your PC before the software is installed,
Windows recognises the device automatically and displays a dialog window prompting
the appropriate drivers. Click Cancel to close the dialog box. Remove the Gigaset USB
Adapter 300 from the PC and start again by installing the software.
Note:
Only connect the Gigaset USB Adapter 300 to a free USB port on your PC when the
Install Shield prompts you to do so.
Note:
You may require administrator rights on your PC for the installation process.