Siemens 300 - Manual (Page 20)

20
Configuring the Gigaset USB Adapter 300
Gigaset USB Adapter 300 / multilanguage / A31008-M1066-R101-2x-7619 / configuration.fm / 14.11.2008
Sc
hablone 200
4_12
_27
Deactivating Autostart
The Gigaset WLAN Adapter Monitor is opened automatically every time you launch
your PC. If you do not need the monitor all the time, you can deactivate Autostart.
ì
Select Start - Programs - Autostart.
ì
Right-click the Gigaset WLAN Adapter Monitor entry.
ì
Select Delete to remove the link to Gigaset WLAN Adapter Monitor from Auto-
start.
Since this means that the monitor will not be launched each time you start your PC, you
will have to start it manually when required (see page 19).
Operating the Gigaset WLAN Adapter Monitor
In the Gigaset WLAN Adapter Monitor user interface, you will find various settings and
status displays for your network adapter on various tabs, which are described in detail
in the following section.
Buttons
Click the buttons beneath each tab to use one of the following options:
Wireless operation is activated for the network adapter (green
icon). The PC is available on the network.
ì
Click Radio On to deactivate wireless mode on the network
adapter.
Radio Off is displayed. The PC is no longer available on the
network.
Wireless mode is deactivated for the network adapter (red icon).
The PC is not available on the network.
ì
Click Radio Off to activate the network adapter's radio mode.
Radio On is displayed. The PC is available on the network.
Use the Help button to open the Gigaset WLAN Adapter Monitor
help file.
Use the Hide button to close the user interface of the Gigaset
WLAN Adapter Monitor.
The icon in the status area on the taskbar indicates that the
monitor is still active in the background.
ì
Double-click this icon if you want to open the Monitor user
interface again.