Sony BRC-Z700 - Manual (Page 61)

In
s
ta
llat
ion
a
nd
Conne
c
tio
ns
Connections
61
8
Connect the cables to the connectors on the rear of
the camera.
Note
Take the proper steps to ensure that the load of the
cables connected does not cause problems.
To remove the camera
1
Remove the three screws used to attach the camera
in step 7 of “Installation on a shelf, etc. in a high
position (example).”
2
Turn the camera with the bracket clockwise to
remove.
Connections
Connecting to an AC Outlet
Use the supplied AC power adaptor and AC power cord
to connect the camera to an AC outlet.
RGB/COMPONENT
VISCA RS-422
1 2 3 4 5 6 7 8 9
EXT SYNC IN VIDEO
IR SELECT
75
1 2 3
OFF ON
DATA MIX OFF ON
IN VISCA RS-232C OUT S VIDEO DC IN 12V
R
AC power adaptor MPA-AC1
(supplied)
to AC outlet
DC IN 12V
AC power cord (supplied)