Sony BRC-Z700 - Manual (Page 55)

In
s
ta
llat
ion
a
nd
Conne
c
tio
ns
Installation
55
image may be distorted. This is not malfunction of the
camera.
Installing the Camera in a High
Position
Using the supplied ceiling brackets, wire rope and
screws, and the attachment materials (not supplied), you
can attach the camera to a ceiling or on a shelf, etc. in a
high position.
When you install the camera, always install it on a level
ceiling or shelf, etc. If you have to install it on an incline,
make sure that the inclination is within ± 15 degrees, so
that the pan/tilt performance is guaranteed.
Before installation
After deciding the shooting direction, make the required
holes for the ceiling bracket (B) and connecting cables
on the ceiling or shelf, etc. For the dimensions of the
ceiling bracket (B), see page 83.
Notes
• The connecting cables cannot be passed through the
ceiling bracket (A). A hole for the wiring is required
in the ceiling or on a shelf, etc. behind where the
camera is to be installed.
• Do not attach any object other than the camera to the
ceiling brackets.
• The ceiling bracket cannot be attached to the junction
box when installing the camera on a ceiling.
Installation on a ceiling (example)
1
Set IMG-FLIP to ON in the SYSTEM menu.
2
Remove the four screws on the bottom of the
camera to remove the four feet.
3
Attach the ceiling bracket (A) to the bottom of the
camera using the supplied four screws (3M3 × 8).
Position the a hole for screwing on the ceiling
bracket (A) to the front of the camera as illustrated,
align the screw holes on the ceiling bracket with
those on the bottom of the camera, then attach the
bracket to the camera.
• When you attach the camera to a ceiling or shelf, etc.
in a high position, entrust the installation to an
experienced contractor or installer.
• Attach the camera to the ceiling or shelf, etc. firmly,
after making sure the ceiling, shelf, etc. and the
attachment materials (not including the supplied
accessories) are strong enough to bear a weight of 60
kg (132 lb 4 oz). If the ceiling or shelf, etc. is not
strong enough, the camera may fall and cause
serious injury.
• Be sure to attach the supplied wire rope to prevent
the camera from falling.
• Check periodically, at least once a year, to ensure
that the connection has not loosened. If conditions
warrant, make this periodic check more frequently.
Caution
3M3 × 8 (supplied)
Ceiling
bracket (A)
Front of
camera