Sun Microsystems GigaSwift Ethernet Adapter - Manual (Page 79)

Chapter 4 Configuring Driver Parameters 57
rx_split_pkts Number of packets that were split across two pages.
rx_no_comp_wb Number of times the hardware cannot post completion entries for
received data.
rx_no_buf Number of times the hardware cannot receive data because there is
no more receive buffer space.
rx_new_pages Number of pages that got replaced during reception.
rx_new_hdr_pgs Number of pages that were filled with packets less than 256 bytes
that got replaced during reception.
rx_new_mtu_pgs Number of pages that were filled with packets greater than 256
bytes and less than 1514 that got replaced during reception.
rx_new_nxt_pgs Number of pages that contained packets that were split across
pages that got replaced during reception.
rx_hdr_drops Number of times an entire page of packets less than 256 bytes each
was dropped because the driver was unable to map a new page to
replace it.
rx_mtu_drops Number of times an entire page of packets greater than 256 bytes
and less than 1514 each was dropped because the driver was unable
to map a new page to replace it.
rx_nxt_drops Number of times a page with a split packet was dropped because
the driver was unable to map a new one to replace it.
rx_rel_flow Number of times the driver was told to release a flow.
TABLE 4-13 Transmit and Receive Parameters (Continued)
Parameter Description