Sun Microsystems GigaSwift Ethernet Adapter User Manual

Page 32

Sun GigaSwift Ethernet Adapter Installation and User’s Guide • August 2004

2. List the network devices on your system.

You should see the full path name of the

network

devices, similar to the example

below. In this example, the

network@0

and the

network@1

devices are the Sun

GigaSwift Ethernet adapter, and the

network@2

is the onboard Ethernet device.

/pci@8,600000/network@1

identifies the Ethernet port

Note –

If you do not see the device listed, check that the adapter is properly seated.

If necessary, reinstall the adapter.

3. View the device that you installed.

Using the previous example, type:

ok show-nets

a) /pci@8,600000/network@1

b) /pci@8,700000/network@5,1

q) NO SELECTION

Enter Selection, q to quit:

cd /pci@8,600000/network@1