Sun Microsystems GigaSwift Ethernet Adapter - Manual (Page 56)

34 Sun GigaSwift Ethernet Adapter Installation and User’s Guide • August 2004
The following examples show the usage of the boot net command line with device
parameters specified:
To attempt to force the link-up while advertising 100 Mbps full-duplex capability to
the link partner:
To attempt to force link-up while advertising 1000 Mbps full-duplex link-clock
master capibility to the link partner:
100 auto N/A 1 0 0 1 1 1
100 1 0 0 1 1 1
10 full N/A 0 0 0 0 0 0 1
10 half N/A 0 0 0 0 0 0
10 auto N/A 1 0 0 0 0 1
10 1 0 0 0 0 1
auto full 1 1 0 1 0 1
auto half 1 0 1 0 1 0
auto auto 1 1 1 1 1 1
auto 1 1 1 1 1 1
auto auto 1 1 1 1 1 1
TABLE 3-2 link-clock Capabilities for Link Up
link-clock master-cfg-enable master-cfg-value Description
slave 1 0 link clock slave
master 1 1 link clock master
auto 0 0 default link clock auto
# boot net:speed=100,duplex=full,
# boot net:speed=1000,duplex=full,link-clock=master,
TABLE 3-1 Device Link Parameters
Device Parameters Device Link Capability
speed duplex link-clock autoneg 1000fdx 1000hdx 100fdx 100hdx 10fdx 10hdx