Gigaswift ethernet driver operating statistics, Table 4-11 – Sun Microsystems GigaSwift Ethernet Adapter User Manual
Page 76
54
Sun GigaSwift Ethernet Adapter Installation and User’s Guide • August 2004
GigaSwift Ethernet Driver Operating
Statistics
These statistics are part of the statistics presented by the
netstat -k
command.
describes the read-only Media Independent Interface (MII) capabilities.
These parameters define the capabilities of the hardware. The Gigabit Media
Independent Interface (GMII) supports all of the following capabilities.
TABLE 4-11
Read-Only
ce
Device Capabilities
Parameter
Description (Local interface Capabilities)
cap_autoneg
0 = Not capable of autonegotiation
1 = Autonegotiation capable
cap_1000fdx
Local interface full-duplex capability
0 = Not 1000 Mbit/sec full-duplex capable
1 = 1000 Mbit/sec full-duplex capable
cap_1000hdx
Local interface half-duplex capability
0 = Not 1000 Mbit/sec half-duplex capable
1 = 1000 Mbit/sec half-duplex capable
cap_100fdx
Local interface full-duplex capability
0 = Not 100 Mbit/sec full-duplex capable
1 = 100 Mbit/sec full-duplex capable
cap_100hdx
Local interface half-duplex capability
0 = Not 100 Mbit/sec half-duplex capable
1 = 100 Mbit/sec half-duplex capable
cap_10fdx
Local interface full-duplex capability
0 = Not 10 Mbit/sec full-duplex capable
1 = 10 Mbit/sec full-duplex capable