Sun Microsystems TIMBERWOLF 9740 - Manual (Page 45)

95693 Revision P 3-13
Operating in Manual Mode
Rotating the Z Column
CAUTION:
Potential equipment damage: The Z column does not rotate a full 360
degrees. If you meet resistance when rotating it, do not force it. Rotate
the Z column in the opposite direction.
If you need to rotate the Z column, grasp it and carefully rotate it, as shown in Figure 3-5 .
If the Z column meets resistance and stops before the desired position is reached, it has
contacted a stopping mechanism. Rotate the Z column in the opposite direction.
Figure 3-5. Rotating the Z Column (E62023)
E62023