Sun Microsystems TIMBERWOLF 9740 - Manual (Page 38)

Cleaning Drives in the LSM
3-6 Revision P 95693
Setting the Cleaning Cartridge Usage Count
You can use the operator panel to set the maximum number of times a cartridge can be
used to make sure that it is effective. Remember that each drive’s cartridge has a
maximum number of cleans, and must be replaced when it expires.
See Figure 3-2 for the menu block diagrams to set the usage count.
Figure 3-2. Setting the Usage Count of the Cleaning Cartridge (C62017)
Online Cap
Unlk Disabld
MENU
PRESSED
C62017
Online CAP
Unlk Disabld
Press Execute to
Show 9840 Data
Press Execute to
Show DLT Data
Press Execute to
Change Limit
EXECUTE
PRESSED
EXECUTE
PRESSED
EXECUTE
PRESSED
EXECUTE
PRESSED
EXECUTE
PRESSED
EXECUTE
PRESSED
MENU
PRESSED
MENU
PRESSED
MENU
PRESSED
19X
DLT, 3490 (9490), or Redwood (SD-3) data
appears here when the LSM is configured for those
drives only.
This menu option only appears when the LSM is
configured for a mixed drive environment of 9840s
and DLTs or CTU environment of 9490s (3490) and
9840
3480
Redwood
limits decrease from 100 to 1 in decrements
of 5;
from 500 to 1 in decrements of 25; from
100 to 1 in decrements of 5.
DLT from 20 to 1 in decrements of 1;
Press Execute to
Set to 100
9840 Count = XXX
Limit = XXX
Press Execute to
Set to 1
MENU
PRESSED
MENU
PRESSED
Press Menu
Until This
Screen
Appears
Q
Q