Samsung Z400 - Manual (Page 70)

54 Section 2B. Nextel Direct Connect
Making a TeamDC Call
1. Press Menu > History .
2. Select a TeamDC group and press the Direct
Connect button.
3. Continue the TeamDC call as any other Direct
Connect or Group Connect call.
4. When you are finished, press to end the call.
(When you end a TeamDC call that you initiated, all
other participants are dropped from the call.)
Joining or Rejoining a TeamDC Call
If you are not available at the beginning of a call, or if
you drop off the call temporarily, you can rejoin the
in-progress TeamDC call.
1. Press Menu > History .
2. Select the TeamDC entry and press the Direct
Connect button.
3. Continue the TeamDC call as described previously.
Note Group Termination Options By default, when the
originator of a Group Connect or TeamDC call ends
the call, all other participants are disconnected as
well. When available, you will be able to select a
setting in
Settings > Direct Connect > Group Call
Options to allow Group Connect and TeamDC calls
you initiate to remain active after you leave the call.
Tip You can also join or rejoin a TeamDC call from your
Contacts. Select the TeamDC group and press the
Direct Connect button.
Note If the TeamDC call has already ended, pressing the
Direct Connect button initiates a new TeamDC call.
Z400.book Page 54 Monday, April 7, 2008 8:06 PM