Siemens 2010 Tango - Manual (Page 60)

Operating more than one handset
50
kap15.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Excluding or including a handset from/into collective ringing
Selecting a handset for ring priority
Setting the number of rings for ring priority
B # 1 Start the setting procedure.
o
Enter the four-digit base code (factory default:”0000“)
(➔ page 19).
O * 2 1 The current setting is shown on the display. handsets
which are in collective ringing mode are indicated by their
internal call numbers and excluded handsets are indica-
ted by a space:
:
:
o
B Enter the internal call number of the desired handset
(1 to 6) and confirm with B . If the handset is already in
collective ringing mode it is excluded. If it was previously
excluded it is reintegrated into the collective ringing.
n21 1234
P f
N
b
(Example 1: handsets1,
2,3,4 are in coll. ringing)
n21 12 4
P f
N
b
(Example 2: handset 3 is
not in collective ringing)
B # 1 Start the setting procedure.
o
Enter the four-digit base code (factory default:”0000“)
(➔ page 19).
O * 2 2 The current setting is shown on the display:
:
o
B Enter the internal call number of the desired handset (1
to 6) and confirm with B .
n22 1
P f
N
b
(Example: handset 1 has
ring priority)
B
# 1 Start the setting procedure.
o
Enter the four-digit base code (factory default:”0000“)
(➔ page 19).
O
* 6 The current setting is shown on the display:
:
o B Enter the desired number of rings (two to nine) and con-
firm with B .
n6 3
P f
N
b
(Example: 3 rings are set)