Siemens 2010 Tango - Manual (Page 47)

Handset settings
37
kap10.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Speed dial numbers
You can store speed dialling numbers for frequently re-
quired external numbers. These speed dialling codes can
then be used for calling outside numbers (➔ page 26).
Checking or store speed dial numbers
You can call up the memory configuration of the speed
dial numbers on the display. You can assign external tele-
phone numbers to the speed dial numbers shown.
You can store 10 call numbers as speed dial
numbers.
Each speed dial number can consist of up to 22
digits and can include numbers as well as the
pound, star and signal keys, and manual “dial
pause”. If you enter longer call numbers, only the
first 22 digits will be stored.
You can also handle speed dial numbers during
a call.
B
Q
Start setting procedure.
o
Select a speed dial number: Press a digit from 0 to 9. The
selected speed dial number is displayed on the screen of
the handset, followed by the memory contents.
:
:
B Acknowledge the display.
or
o Enter new call number. Any old call number will be over-
written.
Q With this key you can correct or delete the entered call
number.
B Press to store the call number.
3 z
P f
N
(Example: speed dial no. 3
is unassigned)
0 123456
P f
N
(Example: speed dial no. 0
is assigned to 123456)