Siemens 2010 Tango User Manual

Page 16

Notes on operation

kap03.fm5

18.7.99

Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619

Notes on operating the handset

For users who wear hearing aids

If you wear a hearing aid, please note that radio signals

can interfere with hearing aids, and if sufficiently loud,

can cause a very unpleasant humming sound.

Using rechargeable batteries

The following should be noted when using
rechargeable batteries:

●

Only use the rechargeable battery types supplied (AA

nickel-cadmium batteries). When replacing recharge-

able batteries, the following can be used:
Saft RC6, Panasonic P-60 AA/1P, Philips R6 NC-P,

UCAR RC6, Eveready XC6, DAIMON ACCU 1000,

Sanyo N-3U, Varta Rechargeable Accu Plus Ni-Cd 1.2V,

No. 5006.

●

Nickel-metal-hydride (NiMH)

rechargeable batteries can significantly increase the

time for which Gigaset 2000S Tango can be used.

The following products are authorized:
Sanyo HR-3U (1300 mAh), GP GP120 AAHC,

Emmerich CE R 6, Energizer EMH-1100AAC,

Varta VH1101AA,

●

Using other battery types or non-rechargeable batter-

ies may cause malfunctions or even damage the

equipment. The manufacturer shall assume no liabili-

ty in this case.

Once the NiMH rechargeable batteries have

been inserted, the following should be ob-

served to ensure maximum lasting power from

your batteries: Once the batteries have been ful-

ly charged for the first time, the handset prema-

turely indicates that the batteries are running

low (

). In order to deep discharge the batter-

ies, continue to use the handset until the battery

symbol

appears and the batt. low beep

sounds (caution: max. operating time remaining

is 10 minutes). In this way the handset recogniz-

es the extended capacity of the rechargeable

batteries and will in future display the correct

battery charging status.

Opening the battery compartment resets the

display to the capacity of the batteries delivered

with the telephone.

Never use ordinary batteries.