Siemens 2010 Tango - Manual (Page 50)

The Gigaset 2010 Tango lock functions
40
kap13.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
The Gigaset 2010 Tango lock functions
Activating/deactivating the Gigaset 2010 Tango lock for outgoing calls
It is possible to lock the Gigaset 2010 Tango for outgoing
calls.
If emergency numbers are stored, they can be dialled
even if the lock is active.
It is possible to receive calls while the lock function is on.
The factory default for this function is deactivated.
Emergency calls when the Gigaset 2010 Tango is locked
Emergency calls can be dialled
● even if the Gigaset 2010 Tango is locked for outgoing
calls (➔ page 40), or
● if the handset is only set for “outward-restricted trunk
access” (➔ page 44).
You can program four emergency call numbers.
Emergency call numbers can have up to 16 digits.
You can also lock individual handsets for out-
going external calls (➔ page 45).
B
# 2 4 Start the setting procedure.
o
Enter the four-digit system code (factory default “0000“).
1 B Switch on the lock.
or
0
B Switch off the lock.