Siemens 2010 Tango - Manual (Page 53)

The Gigaset 2010 Tango lock functions
43
kap13.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Deleting all barred numbers
Activating/deactivating the call number lock
You can activate and deactivate the call number lock sep-
arately for each registered handset. Other handsets are
not affected by the lock.
Calls can still be accepted on the handset even if the call
number lock is switched on.
The factory default setting is off.
B
# 8 7 Start the setting procedure.
o
Enter the four-digit system code (factory default “0000“)
(➔ page 19). The registered handsets, i.e. their internal
call numbers, which have a barred number stored are
shown on the display:
:
o
Enter the internal call number of the desired handset
(1 to 6).
B Delete all barred numbers for the selected handset.
1 4 5
P f
N
b
(Example: barred numbers
are stored for handsets 1, 4,
and 5)
The delete function must be repeated for each
handset.
B
# 8 4 Start the setting procedure.
o
Enter the four-digit system code (factory default “0000“)
(➔ page 19). The registered handsets, i.e. their internal
call numbers, are shown on the display:
:
o
Enter the internal call number of the desired handset (1
to 6).
1
B Switch on the call number lock for the selected handset.
or
0 B Switch off the call number lock for the selected handset.
1 2 3
P f
N
b
(Example: handsets 1, 2,
and 3 are registered)