Siemens 2010 Tango - Manual (Page 49)

Handset settings
39
kap10.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Activating/deactivating the call duration display
In the case of external calls (➔ page 24), the call duration
display is started approximately 12 seconds after the last
digit is dialled. The display remains visible for about four
seconds after the call is finished. The call duration display
can be switched on and off.
The factory default for the call duration display is
“on”.
B # 1 Start setting procedure.
o
Enter the four-digit system code (factory default “0000“).
O 9 6 The current setting is shown on the handset display:
96 1 = on, 96 0 = off.
1
B Switch on the call duration display.
or
0 B Switch off the call duration display.