Siemens 2010 Tango - Manual (Page 42)

Base station settings
32
kap09.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Base station settings
You can program your Gigaset 2010 Tango to suit your
own individual requirements. The settings are made from
a registered handset.
Switching the base station ringer off and setting the ringer volume
It is possible to define whether the ringers should be sig-
nalled on the base station or only on the handset. You can
set the ringer volume for the ringer on the base station.
There are seven volume levels available:
The factory default is level 6 (loud).
Level 0 = Switch off base station ringer.
Calls will only be signalled on the
handset.
Level 1 ... Level 6 = Ringer volume low ... loud
It is also possible to set the ringer volume on the
handset (➔ page 34).
B # * 5 Start setting procedure. The ringer setting is sounded.
The set volume is indicated on the display:
:
o B Press the digit for the desired volume (1 to 6) or 0 to
switch the ringer off and store setting.
n5 6
P f
N
b
(Example: ringer volume 6
is set)